2021 Pronovost Industrial Snowblower PGV-1022TRC

Information

2021 Pronovost Industrial Snowblower PGV-1022TRC

Three high performance snowblower series : semi-industrial (PGS), industrial open flight auger (PGV) and full flight auger. For high volume, continual snow blowing such as road clearing, truck loading and many other applications. Designed for ease of maintenance, these snowblowers can be used for continuous service conditions. Specifications may be adapted under certain conditions.

A break-through in the snow removal world, the concept of the large open flight auger offers the following benefits :

Less snow spillover and leftover on the ground; Less demanding on your engine since the snowblower is easier to turn and, therefore, increases the yield by decreasing fuel consumption; Easier to go through hardened snow or ice; More fun to use !

Features may include:

  • Renold #100HV chain in oil bath.
  • Auger assembled on quick dismount hub.
  • Drum liner made of Hardox 450.
  • Curved blades impeller.
  • Easy impeller adjustment.
  • Adjustable front 3 point hitch.
  • Speed reducer with or without rotation inverter.
  • Large, open and serrated auger.
  • Easy maintenance.
  • Industrial Yellow color.

Photos

Highlights

  • London, Ontario
  • 2021
  • Pronovost
  • Industrial Snowblower PGV-1022TRC
  • Available
  • Cutting: 1734 mm (68 1/4") | of chute base: 1384 mm (54 1/2") | with telescopic chute: PCTC-IND : 3327 mm (131") closed, 4128 mm (162 1/2") extended PCTC-INDR : 3277 mm (129") closed, 4089 mm (161") extended | of impeller center: 610 mm (24")

Specifications

  • 2021
  • Pronovost
  • Industrial Snowblower
  • PGV-1022TRC
  • General
  • Recommended: 225 to 350 HP PTO
  • Rotor: 540 inverted | Required RPM for the tractor PTO: 1000 RPM | Approximate performance: 2500 tons imp. / hour (tractor 225 HP)
  • Rotational force: 222 079 lbs-po
  • Depth of drum: 381 mm (15") | Main auger diameter: 864 mm (34") - removable hub, dual band, bolted, welded carbon steel teeth | Upper auger diameter: 508 mm (20") - removable hub, single band, Hardox 450 welded teeth | Bearing / ductile iron housing: Right : 64 mm (2 1/2") | Chute rotation maximum angle - Hydraulic motor rotation: 305°
  • 2591 mm (102")
  • Cutting: 1734 mm (68 1/4") | of chute base: 1384 mm (54 1/2") | with telescopic chute: PCTC-IND : 3327 mm (131") closed, 4128 mm (162 1/2") extended PCTC-INDR : 3277 mm (129") closed, 4089 mm (161") extended | of impeller center: 610 mm (24")
  • 940 mm (37") | Shaft: 64 mm (2 1/2" )
  • From 3 point hitch at its shortest: 1030 mm (40 9/16")
  • 2484 kg (5475 lbs) | Including chute: 2484 kg (5475 lbs) including chute PCTC-IND and reducer
  • Number of impeller blades: 6 - 3/8" thickness, replaceable, Hardox 450 | Number of augers: 2 | Drive chain - Main auger: Renold No. 80HV in oil bath | Number of shear bolts: 1 for impeller + 1 for auger| Antifriction for chute: Ring
  • Category: 2 or 3 - 975 mm (38 3/8")